what to make out of a shirt for keepsake item

Download Article

Download Article

Turning a shirt into a pillow is a unique way to preserve a favorite shirt, upcycle a shirt from a austerity shop, or simply get crafty with a shirt that you no longer wear! You can use a t-shirt or a button-down shirt to create your pillow. Sew a pillow if you lot accept a sewing car and know how to sew, or try turning your t-shirt into a no-sew knotted pillow for a quick and piece of cake craft that anyone can exercise! No matter which option you choose, this craft will only take around i hour.

1. 

   i

   Trace the outline of the image on the shirt onto wax paper. Place a piece of wax newspaper over the paradigm on the shirt. Then, draw a line onto the wax paper going around the outside of the image. Make certain to depict a line that is 0.5 in (1.3 cm) or more past the edges of the image. This will help to ensure that you do not cut through the image.^[1]

   • Skip this if you lot plan to utilize a solid-colored shirt to make the pillow.

2. 

   2

   Draw the desired pillow shape around the tracing on the wax paper. The tracing may be an irregular shape. If information technology is, depict a shape around it on the wax newspaper in the desired shape of your pillow.^[2]

   • For example, yous could draw a square, circle, triangle, star, hexagon, or other shape that encloses the tracing on the wax paper.

   Advertising

3. 

   3

   Cutting the sleeves and side seam of the shirt to create 2 separate pieces. Don't worry about cut out your desired shape nonetheless. Use a sharp pair of pair of scissors to cutting the sleeves off of the shirt. Then, cut along the side seam and shoulders. This will leave you with ane front and 1 back slice.^[3]

4. 

   4

   Iron the fusible fleece onto the forepart and back pieces of the t-shirt. Lay the t-shirt pieces so that their right (impress or outer) sides are facing down. Then, place a piece of fusible fleece interfacing over each of the pieces. Iron beyond the surface of the fusible fleece to attach it to the backside of each t-shirt piece.^[iv]

   • Exercise not worry if the shirt pieces and fusible fleece are different sizes.
   • Make sure to follow the manufacturer'due south instructions for how long to agree the fe in place and what settings to use.

5. 

   v

   Cut out the t-shirt material and fusible fleece interfacing. Next, plough the t-shirt with fusible fleece backings over and then that the shirt sides are facing up. Identify the wax design piece you created over the front side of your t-shirt. Pin the edges of the wax pattern to arrive stay put. And so, cut the t-shirt and fleece along the edges of the blueprint piece.^[5]

   • Echo for the other t-shirt and fusible fleece piece.

6. 

   6

   Stack the pieces and then the correct (print) sides are facing each other. Make sure the edges are lined upwardly all the way around. Insert a pivot every 2 to 3 in (v.1 to 7.6 cm) along the edges of the pillow.^[vi]

   • Insert the pins then that they are perpendicular to the edges of the fabric. This will make it easier to remove them equally you sew together.^[7]

7. 

   seven

   Sew together forth the outer edges leaving a 4 in (10 cm) opening. Set up your sewing motorcar to the straight run up setting. So, sew a straight stitch 0.v in (one.iii cm) from the raw edges of the 2 pieces. Leave a 4 in (10 cm) section open up so that you can invert the pillowcase and insert the stuffing in through this opening.^[8]

   • Make sure to remove the pins as yous sew together. Do non sew over them or you may harm your sewing machine!

   Tip: Change your sewing machine needle before you commencement sewing. This volition help to ensure that your needle is sharp enough to sew together through all of the fabric layers with ease.

8. 

   8

   Invert the pillow and stuff information technology with polyester filling. Button the fabric through the opening yous left and then that it is turned right-side out and the raw edges of the cloth are hidden. Then, button enough stuffing into the opening to fill out the pillow.^[ix]

   • Be sure to push the stuffing into all corners and edges of the pillow class. This will assistance to ensure that it is nice and plump!

9. 

   ix

   Fold over the raw edges and sew the opening airtight. Once your pillow is stuffed, fold over the 0.v in (1.3 cm) of fabric along the opening of the pillow class. Constrict the textile inside of the pillow to hide the raw edges. Identify a few pins through both sides of the folded over edges to keep them together and temporarily close the opening. Then, sew a straight stitch 0.25 in (0.64 cm) from the pinned edge to secure information technology.^[10]

   • Make sure to remove the pins equally you sew or you may damage your sewing auto.

   Advert

1. 

   1

   Cut off the sleeves and side seams to create a rectangle of cloth. Lay the shirt out flat with the front facing upwardly and the sleeves out to the sides. Cutting straight down 1 side of the shirt starting where the sleeve meets the shoulder. Keep cutting down all the manner to the lesser of the shirt to remove the sleeve and side seam. Then, repeat on the other side to remove the other sleeve and side seam.^[11]

   • If the fabric looks uneven on the sides, trim some other 1 to two in (2.5 to v.one cm) off to straighten the edges out.^[12]

2. 

   2

   Fold and pin the shoulder seam and collar and so they overlap. Lift the shirt up and open up upwards the textile then that the front and back of the shirt are flat out in 1 long slice with the shoulder seam and collar at the center. Then, pinch the shirt at the shoulder seam and lift the cloth upwardly by about 3 in (vii.6 cm). Fold the shoulder seam and collar back so that they overlap with the back portion of the shirt merely below the shoulder seam.^[13]

   • Brand sure that the collar is positioned so that there volition be textile behind it. Otherwise, you lot volition have an opening in the pillow where the neckband is.
   • Place a pivot going perpendicular to the shoulder seam about every 2 to 3 in (5.1 to 7.six cm).^[14]

3. 

   iii

   Sew across the shoulders and around the collar. Next, accept the shirt to your sewing machine and ready it to the straight stitch setting. Sew 0.five in (ane.3 cm) from the shoulder seam and around the bottom of the neckband to go along the shirt in this folded position.^[15]

   Alarm: Do non sew across the pins! Remove them earlier you sew over each section or yous may harm your sewing auto.

4. 

   4

   Cut off the bottom 3 in (7.6 cm) of fabric on both sides. Leave the shirt open up so that the layers are separated. Then, cutting a straight line beyond the bottom of the shirt'southward back to remove almost iii in (7.half-dozen cm) of fabric.^[16]

   • Repeat this on the front piece to remove the same amount of fabric.

5. 

   5

   Sew a directly sew forth the sides and bottom edges. Bring the top and lesser edges of the shirt together then that the right sides are facing each other. Brand sure that the raw edges are lined upward on the sides of the shirt equally well. Then, insert a few pins through the layers to go on the edges lined up. Sew together a straight sew together 0.5 in (1.3 cm) from the raw edges on the sides and lesser of the shirt.^[17]

6. 

   6

   Unbutton the shirt and turn it right-side out. After y'all accept finished sewing the edges together, unbutton the shirt and turn the fabric and so that the right sides are facing out. Then, press into the corners to push out the material and prevent it from bunching up inside the shirt pillowcase.^[18]

7. 

   7

   Stuff the shirt with polyester filling or a pre-made pillow. You may stuff the shirt with polyester filling or simply place an as-sized pillow into the shirt opening and button it upwards. For a plump pillow, make sure to use enough stuffing or insert a pillow that is well-stuffed.^[19]

   • After you stuff the shirt pillowcase, your pillow is complete!

   Advertizing

1. 

   ane

   Cut an 18 in (46 cm) foursquare out of the eye of the t-shirt. Smooth out the shirt so that in that location are no lumps or bumps and make the certain that the edges of the shirt are fifty-fifty. And then, apply a ruler and chalk to mensurate and marking an eighteen in (46 cm) square at the heart of the shirt.^[20] Cutting along the lines going through both layers of fabric to create 2 square pieces out of the t-shirt.

   • Use very sharp textile scissors for best results.

   Tip: If in that location is an epitome on the shirt that you want to preserve, brand sure that the square fully encloses the image and that there is at to the lowest degree a 3 in (seven.six cm) border all the mode effectually the epitome.

2. 

   2

   Measure and cut out 1 by iii in (2.5 by 7.vi cm) fringe on all 4 sides. Use the ruler and chalk to trace i in (2.5 cm) wide and 1 in (two.5 cm) long strips of fringe going all the way around the foursquare except for at the corners. At that place will be a iii by 3 in (seven.6 by seven.6 cm) square of unusable cloth at each corner. Cut this out and throw information technology away equally you cut out the fringe.

   • Cut advisedly and slowly to ensure that there are no jagged or uneven edges.
   • Brand sure to cutting through both layers of fabric and keep the edges of the squares aligned every bit you cutting out the fringe.

3. 

   iii

   Tie the summit and lesser layers of fringe together on 3 sides. Outset at 1 stop of the square and necktie together the top and bottom cease pieces 2 times to form a knot. Go on to tie the top and lesser layers of fringe together in this way all the fashion to the end of the row. Then, repeat this for the next 2 sides of the square.

   • In that location should be 1 side left untied when you are finished.

4. 

   four

   Stuff the pillow and tie the remaining side of fringe. Make full the t-shirt pillowcase with polyester filling. Keep to fill the case until yous are happy with its plumpness, Then, tie up the fringe on the open up cease to complete the pillow.

   • Make sure to constrict in the filling as yous necktie the terminal side to prevent information technology from escaping.

   Advertizement

Ask a Question

200 characters left

Include your electronic mail address to become a bulletin when this question is answered.

Submit

Advertising

Thanks for submitting a tip for review!

Things You'll Need

• T-shirt
• Pen
• Wax paper
• Scissors
• Atomic number 26
• Fusible fleece
• Sewing car
• Matching thread
• Polyester filling

• Push-downward shirt
• Chalk or textile marker
• Ruler
• Pair of scissors
• Iron
• Sewing machine
• Matching thread
• Polyester filling

• T-shirt
• Ruler
• Chalk
• Scissors
• Polyester filling

Most This Article

Article Summary 10

To make a pillow out of a T-shirt, first make a wax newspaper template. Trace effectually any images on the shirt so y'all don't accidentally cut through them. When that's washed, cut off the sleeves and cut through the seams on each side to make two pieces of material. Later cutting the shirt apart, iron some fusible fleece onto the dorsum of each piece. Once the fleece is in place, turn the pieces over so the fleece side is downward and cut each 1 into the shape of your wax paper template. Stack the cut pieces so the print sides are facing each other, then pin them together and sew together along the edges, leaving one small opening. Finish your pillow past turning it right-side-out and stuffing information technology with filling, then sew the opening shut. To learn how to make a pillow out of a button-down shirt, read on!

Did this summary help yous?

Thanks to all authors for creating a folio that has been read 59,257 times.

Did this article help y'all?

sowardsmussiout.blogspot.com

Source: https://www.wikihow.com/Make-a-Shirt-Pillow

Share this post